Dapping Tools and Blocks

Tools used for forming and doming sheet metal for various designs.
Sort by Position: Low to High
48 Per Page
Wood Dapping Block w/ 2 Punches
Wood Dapping Block w/ 2 Punches
$6.95
Two hardwood punches and dapping block for shaping cases or removing dents. Wood will not scratch or mar precious metals. The block features two different...
Add to wish list
Wood Forming Block
Wood Forming Block
$14.00
Made of hardwood and hand sanded to a smooth finish, this block is used when forming fine or soft metals where marring could be an issue. Features include...
Add to wish list
7 Round Groove Shaping Block w/ Steel Block
7 Round Groove Shaping Block w/ Steel Block
$31.95
Made of hardwood to prevent marring, the 7 depressions have a smooth finish and include the following diameters which are all 1/2" deep: 2-1/4", 1-3/4",...
Add to wish list
5 pc Shaping Punch Set
5 pc Shaping Punch Set
$10.95
Made of hard wood for non-marring, each punch is gently domed with a smooth finish. 3-3/4" in length, the diameters include: 2", 1-1/2", 1", 3/4" and 5/8"....
Add to wish list
Large Shaping Block w/ 2 depressions
Large Shaping Block w/ 2 depressions
$33.95
Large Shaping Block features TWO round 5" depressions (23 and 28mm deep) and four u-channel grooves along the length of two sides. Made of rosewood this...
Add to wish list
4 Round Shallow Groove Shaping Block
4 Round Shallow Groove Shaping Block
$24.95
Made of hardwood, this block is used to shape metal without marring. Each depression is 3/4" deep, with a gentle. The diameters include: 4", 3-1/2", 3" and...
Add to wish list
U-Channel (Swage) Hardwood Block w/ Hammer punches
U-Channel (Swage) Hardwood Block w/ Hammer punches
$14.95
Made of smoothly finished hardwood, this U-Channel Hardwood Block includes six channels and a 90° V-groove on the bottom as well as six corresponding shaping...
Add to wish list
Wood Forming Block-Pear
Wood Forming Block-Pear
$20.00
Made of hard wood to prevent scratching or marring, this sturdy forming block has seven teardrop depressions. Measures 6.25" x 4" x 1.25.
Add to wish list
Wood Forming Block-Oval
Wood Forming Block-Oval
$20.00
Made of hard wood to prevent scratching or marring, this sturdy forming block has seven oval depressions. Measures 6.25" x 4" x 1.25.
Add to wish list
Wood Forming Block-Round
$20.00
Made of hard wood to prevent scratching or marring, this sturdy forming block has seven round depressions. Measures 6.25" x 4" x 1.25.
Add to wish list
Large Wood Dapping Set w/ 10 punches
Large Wood Dapping Set w/ 10 punches
$59.95
This large dapping set includes hardwood block and 10 punches ranging in size from 65-16mm (2-1/2" to 5/8"). The hardwood block is double-sided with 10...
Add to wish list
8PC WOOD DAPPING SET W/BLOCK AND STAND
8PC WOOD DAPPING SET W/BLOCK AND STAND
$46.00
This wood dapping set features 8 domed punches and a wood block with matching depressions. Punches range in size from 10mm up to 31mm in 3mm increments,...
Add to wish list
Large Wood Forming Stake
Large Wood Forming Stake
$45.00
Large Wood Forming Stake. Overall length 9 1/4". 3" Middle Height. 3/4" Wide. Secure in table vise for best use.
Add to wish list
Save 16% econ spoon stake
Economy Spoon Stakes
$25.00 $21.00
A set of cast steel stakes in 4 sizes: 24 x 34, 28 x 43, 34 x 50, and 40 x 64 mm. These are economy tools, so you can expect to find faint scratches and very...
Add to wish list
8 pc Dapping Tool Set
8 pc Dapping Tool Set
$35.00
Includes eight dapping tools and matching block. Cavity sizes are 28,24,20,18,15,12,9 and 6 mm with corresponding punches. Block is completely ssmooth on...
Add to wish list
Save 31% 24 pc Dapping Tool Set
24 pc Dapping Tool Set
$70.00 $48.00
Includes twenty-four dapping tools and a block that has 18 depressions. Punches range from 3.5 mm to 25.4mm. Depressions in the 2" x 2" x 2" block range...
Add to wish list
24 pc Punch Set
24 pc Punch Set
$70.00
Set of 24 individual dapping punches, ranging from 7/16" to 1". Punch sizes are clearly marked on the two tiered wooden stand that hold the punches. 7lbs
Add to wish list
U-Channel (Swage) Metal Block w/ Hammer punches
U-Channel (Swage) Metal Block w/ Hammer punches
$45.00
Prefer hardened steel? Our 165 mm x 60mm U-Channel Steel Forming Block has six channels for working on large and small projects and a 90° V-groove on the...
Add to wish list
Dapping/Swage Block
Dapping/Swage Block
$30.00
2" Cube, 12 1/2 spheres (4-42mm) and 10 V-shaped grooves. 2lbs
Add to wish list
NYLON PUNCH SET-8 PC
NYLON PUNCH SET-8 PC
$19.95
Punches ranging from 5-27mm. Made of lightweight but strong and durable nylon composite. The softer (than steel) material will not mar the metal while still...
Add to wish list

Discover a great variety of Interesting, Informative and Fun Jewelry Making Classes !

You can now sign up for classes online!

 

Our Extended Validation SSL certificate provides you with the highest degree of assurance that Armstrong Tool Supply Co. is a verified and trusted business and that your transactions are secure