Metal Forming

Ordenar por posición: menor a mayor
48 Por Página
Wood Dapping Block w/ 2 Punches
$6.95
Two hardwood punches and dapping block for shaping cases or removing dents. Wood will not scratch or mar precious metals. The block features two different...
Añadir a la lista
Wood Forming Block
$14.00
Made of hardwood and hand sanded to a smooth finish, this block is used when forming fine or soft metals where marring could be an issue. Features include...
Añadir a la lista
2.5" x 2.5" Steel Bench Block
$12.00
2.5" x 2.5" x 1" hardened steel block used for flattening or chasing metal. 1lb 6oz
Añadir a la lista
4" x 4" Steel Bench Block
$15.00
4" x 4" x 3/4" hardened steel block used for flattening or chasing metal. 3lb 2oz
Añadir a la lista
Rubber Block
$7.00
Handy for filing, hammering and other uses, this 4" x 4" rubber bench block is made of tough, firm, vulcanized rubber to give an excellent surface. It...
Añadir a la lista
Guardar 15%
Hex Anvil
$12.95 $11.00
Used as a base for riveting, drilling and staking small parts. Each anvil features 15 holes from 3/64" to 1/4" (1.2mm to 6.4mm) and five slots. 1 5/8" x...
Añadir a la lista
Guardar 10%
Double Horn Anvil with Round Base
$30.00 $27.00
Round base bench anvil has one flat and one round horn on cast steel base. 2 3/4" x 4 3/8". 1.75lbs
Añadir a la lista
Horn Anvil
$13.95
Made of cast steel, they make great bench blocks for shaping metal. 5 1/4" x 2 1/2" x 2 1/4". 1.75lbs
Añadir a la lista
Bench Pin and Anvil- Replacement Bench Pin
$3.95
Replacement Bench Pin for BPN 122.00 Bench Pin and Anvil. 7" x 1 3/4". 1/2 lb
Añadir a la lista
Guardar 8%
1" Chasing Hammer
$12.00 $11.00
1" Chasing Hammer with slightly rounded face, better for flattening wire. Overall length 11", 3oz head weight. 1lb
Añadir a la lista
Guardar 8%
1 1/8" Chasing Hammer
$13.00 $12.00
1 1/8" Chasing Hammer with slightly rounded face, better for flattening wire. Overall length 11", 4oz head weight. 1.2lbs
Añadir a la lista
Guardar 8%
1 1/2" Chasing Hammer
$15.00 $13.85
1 1/2" Chasing Hammer with slightly rounded face, better for flattening wire. Overall length 11", 6oz head weight. 1.5lbs
Añadir a la lista
Guardar 12%
1" Rawhide Mallet
$25.00 $22.00
1" Rawhide Mallet used for stamping and hammering metals which must not be scratched, ash handle. Size 0, 2oz head weight. 1lb
Añadir a la lista
Guardar 13%
1 1/4" Rawhide Mallet
$30.00 $26.00
1 1/4" Rawhide Mallet used for stamping and hammering metals which must not be scratched. Size 1, 4oz head weight. 1.5lbs
Añadir a la lista
Guardar 12%
1 1/2" Rawhide Mallet
$33.00 $29.00
1 1/2" Rawhide Mallet, used for stamping and hammering metals which must not be scratched. Size 2, 6oz head wieght. 2.0lbs
Añadir a la lista
Guardar 17%
2 " Rawhide Mallet
$42.00 $35.00
2 " Rawhide Mallet, used for stamping and hammering metals which must not be scratched. Size 4, 11oz weighted head. 3.5lbs
Añadir a la lista
Square Faced Rivet Hammer
$12.00
One end is flat and square, 1/2" face, for general purpose work and the other end is chisel shaped for spreading the rivet heads. 3" head length, 2.5oz.
Añadir a la lista
Guardar 10%
9 Head Texture Hammer
$30.00 $27.00
Nine interchangeable heads to create nine different textures on non-ferrous metals. Let your imagination take over, this hammer will provide you with a...
Añadir a la lista
7 Round Groove Shaping Block w/ Steel Block
$31.95
Made of hardwood to prevent marring, the 7 depressions have a smooth finish and include the following diameters which are all 1/2" deep: 2-1/4", 1-3/4",...
Añadir a la lista
5 pc Shaping Punch Set
$10.95
Made of hard wood for non-marring, each punch is gently domed with a smooth finish. 3-3/4" in length, the diameters include: 2", 1-1/2", 1", 3/4" and 5/8"....
Añadir a la lista
Large Shaping Block w/ 2 depressions
$33.95
Large Shaping Block features TWO round 5" depressions (23 and 28mm deep) and four u-channel grooves along the length of two sides. Made of rosewood this...
Añadir a la lista
4 Round Shallow Groove Shaping Block
$24.95
Made of hardwood, this block is used to shape metal without marring. Each depression is 3/4" deep, with a gentle. The diameters include: 4", 3-1/2", 3" and...
Añadir a la lista
Guardar 13%
Oval Bracelet Mandrel
$40.00 $35.00
Smooth steel oval mandrel is designed for bracelets with a taper from 2-1/2" to 1-3/4". Length 8-1/2". Weighs 3 lbs. 4 oz.
Añadir a la lista
6" Square Sandbag
$19.00
Great for stamping, chasing and forming these 6" Square Leather Sandbags can be used with or without a bench block.The leather is slip resistant and helps...
Añadir a la lista
Guardar 9%
5" Round Sandbag
$16.00 $14.50
Great for stamping, chasing and forming these 5" Round Leather Sandbags can be used with or without a bench block.The leather is slip resistant and helps...
Añadir a la lista
7" Round Sandbag
$17.00
Great for stamping, chasing and forming these 7" Round Leather Sandbags can be used with or without a bench block.The leather is slip resistant and helps...
Añadir a la lista
U-Channel (Swage) Hardwood Block w/ Hammer punches
$14.95
Made of smoothly finished hardwood, this U-Channel Hardwood Block includes six channels and a 90° V-groove on the bottom as well as six corresponding shaping...
Añadir a la lista
Long Oval Bezel Mandrel
$27.95
Used to form bezels, make chain links and shape decorative ornaments.
Añadir a la lista
Round Bezel Mandrel
$12.00
Used to form bezels, make chain links and shape decorative ornaments. Tapers from 3.75mm to 12.5mm.
Añadir a la lista
Guardar 13%
Oval Bezel Mandrel
$15.00 $13.00
Used to form bezels, make chain links and shape decorative ornaments. Tapers from 4.5x5.6mm to 10.7 x 12mm.
Añadir a la lista
Small Round Bezel Mandrel
$12.00
Used to form bezels, make chain links and shape decorative ornaments. Tapers from 2.6mm to 12.5mm.
Añadir a la lista
Round Bracelet Mandrel
$31.00
Smooth steel round mandrel is designed for bracelets with a taper from 2-1/2" to 1-3/4". Length 8-1/2". Weighs 3 lbs. 4 oz
Añadir a la lista
Wood Bracelet Mandrel
$11.00
Our wood bracelet mandrel is perfect for shaping and removing dents or kinks from bangles or bracelets made of softer, non-ferrous metals. Made of hardwood,...
Añadir a la lista
Guardar 10%
#1Dual Face Texturing Hammer
$20.00 $18.00
One of a series of three double sided hammers. Two different patterns on each hammer allows the user to create attractive patterns on jewelry or other metal...
Añadir a la lista
Bangle Bracelet Sizer Small 1-9
$11.95
Bracelet gauges are made of heavy gauge base metal, nickel-plated and securely attached to a handy 2-3/4" ring for safe-keeping. • Small or baby: Sizes 1–9...
Añadir a la lista
Wood Forming Block-Pear
$20.00
Made of hard wood to prevent scratching or marring, this sturdy forming block has seven teardrop depressions. Measures 6.25" x 4" x 1.25.
Añadir a la lista
Wood Forming Block-Oval
$20.00
Made of hard wood to prevent scratching or marring, this sturdy forming block has seven oval depressions. Measures 6.25" x 4" x 1.25.
Añadir a la lista
Wood Forming Block-Round
$20.00
Made of hard wood to prevent scratching or marring, this sturdy forming block has seven round depressions. Measures 6.25" x 4" x 1.25.
Añadir a la lista
Guardar 13%
Square Bezel Mandrels
$15.00 $13.00
Unmarked square mandrel 11 " long and tapered from 3mm to 12mm.
Añadir a la lista
Guardar 10%
#1Dual Face Texturing Hammer [CLONE]
$20.00 $18.00
One of a series of three double sided hammers. Two different patterns on each hammer allows the user to create attractive patterns on jewelry or other metal...
Añadir a la lista
Guardar 10%
#1Dual Face Texturing Hammer [CLONE] [CLONE]
$20.00 $18.00
One of a series of three double sided hammers. Two different patterns on each hammer allows the user to create attractive patterns on jewelry or other metal...
Añadir a la lista
Peddinghuas 403 Raising Hammer 400g
$48.00
RAISING HAMMERS - Two rectangular faces; each longer than it is wide. Used to create a seamless form through compression with contraction without thinning...
Añadir a la lista
Peddinghaus 402 Planishing Hammer 170g
$49.00
PLANISHING HAMMERS - Two round faces; one gently curved, one flat. Used to smooth and harden metal. The length of the head is 75mm and the face diameter is...
Añadir a la lista
Peddinghaus Goldsmith Hammer 80g
$45.00
This goldsmithing hammer has a chrome plated head. It is meant to be used with soft metals like gold and platinum, for riviting and other small detail work....
Añadir a la lista
Oval Wood Bracelet Mandrel
$16.00
Used to form bangles and bracelets by hammering malleable metals onto the surface. Works best with a nylon or rawhide mallet. Tapers from 2-5/8" x 2-3/8"...
Añadir a la lista
Combo Bench Pin and Anvil
$16.00
Use for support to flatten pieces or lay out work. Flat Anvil is smoothly finished. Adjustable clamp enables you to use it on benches up to 2" thick. Anvil...
Añadir a la lista
14pc Economy Disc Cutter
$42.00
14pc Economy Disc Cutter, cutters from 3mm-16mm.
Añadir a la lista
3 1/2lb. Flat Anvil
$16.95
Made of cast iron steel, larger anvils are excellent for a variety of uses because of their weight. They make great bench blocks for shaping metal. Good for...
Añadir a la lista
 Anterior
1 2 3 4
Siguiente 

Discover a great variety of Interesting, Informative and Fun Jewelry Making Classes !

You can now sign up for classes online!

 

Our Extended Validation SSL certificate provides you with the highest degree of assurance that Armstrong Tool Supply Co. is a verified and trusted business and that your transactions are secure